Nhóm tác giả: ThS. Nguyễn Văn Công1; TS. Nguyễn Văn Ngôn1*
Nơi đăng: Tạp chí Địa Kỹ Thuật, ISSN 0868-279X, số 1, trang 61 – 71, năm 2025
Lĩnh vực: khoa học công nghệ; Loại: bài báo khoa học; Thể loại: trong nước
1 Khoa Kỹ thuật Công nghệ, Trường Đại học Quang Trung;
* Email: nvngon@qtu.edu.vn
Tóm tắt:
Bài báo trình bày kết quả thực nghiệm và đánh giá hiệu quả tăng cường sức kháng uốn cho kết cấu dầm BTCT được tăng cường bằng vật liệu FRP. Thực nghiệm được tiến hành trên mẫu dầm có kích thước (150x150x1000) mm sử dụng các phương pháp tăng cường như: dán ngoài, dán gần bề mặt và dán kết hợp. Kết quả thực nghiệm cho thấy phương pháp tăng cường kết hợp cung cấp sức kháng uốn tăng cường đến 81,1% so với mẫu dầm không tăng cường. Bên cạnh đó, giá trị tính theo ACI 440.2R gần với thực nghiệm hơn giá trị tính theo ISIS đối với các phương pháp dán ngoài và dán gần bề mặt. Ngược lại, ISIS cho kết quả dự báo gần với thực nghiệm hơn đối với phương pháp tăng cường kết hợp
Từ khóa: Bê tông cốt thép, FRP, NSM, EBR, CEBNSM, gia cố kết cấu
Abstract
The paper presents experimental results and evaluates the effectiveness of flexural strength enhancement for reinforced concrete beam strengthened with fiber-reinforced polymer materials. The experiments were conducted on beam specimens with dimensions of (150×150×1000) mm, using various strengthening techniques such as externally bonded reinforcement (EBR), near-surface mounted (NSM), and combined externally bonded and Near-Surface mounted (CEBNSM). The experimental results indicate that the combined strengthening method provided up to an 81.1% increase in flexural capacity compared to the unstrengthened beams. Additionally, the flexural strength values predicted by ACI 440.2R were closer to the experimental results than those predicted by the ISIS guidelines for the EBR and NSM methods. Conversely, the ISIS guideline provided predictions that were closer to the experimental results for the combined strengthening method.
Key words: Reinforced concrete, FRP, NSM, EBR, CEBNSM, structural strengthening
